Sony MHC-V77DW Operating Instructions Manual page 67

The region code on the DVD VIDEO
• •
does not match the system.
The sound skips.
Wipe the disc clean (page 77).
• •
Reload the disc.
• •
Move the unit to a place with no
• •
vibration.
Playback does not start from the
first track.
Set the play mode to Normal Play
• •
(page 30).
Resume Play has been selected.
• •
Press  twice. Then, press  to
start playback.
You cannot perform some
functions such as Stop, Lock
Search, Slow-motion Play, Repeat
Play, or Shuffle Play.
Depending on the disc, you may
• •
not be able to do some of the
operations above. Refer to the
operating instructions supplied
with the disc.
The DATA CD/DATA DVD (MP3,
MPEG4, or Xvid) cannot be played
back.
The data is not stored in the
• •
supported format.
Make sure you have selected
• •
the correct Media Mode before
playback.
The folder name, track name, file
name and ID3 tag characters do
not appear properly.
The ID3 version is not in Version 1
• •
(1.0/1.1) or Version 2 (2.2/2.3).
The character codes that can be
• •
displayed by this system are as
follows:
•
— Upper cases (A to Z)
•
— Numbers (0 to 9)
•
— Symbols (< > * +, [ ] \ _)
Other characters appear as "_".
The sound loses stereo effect
when you play back an AUDIO CD,
VIDEO CD, audio file, video file, or
DVD VIDEO.
Turn off the Vocal Fader
• •
(page 60).
Make sure the system is
• •
connected properly.
USB device
Transferring results in an error.
You are using an unsupported USB
• •
device. Check the information on
the website about compatible USB
devices (page 12).
The USB device is not formatted
• •
correctly. Refer to the operating
instructions of the USB device on
how to format.
Turn off the system and remove
• •
the USB device. If the USB device
has a power switch, turn the USB
device off and on again after
removing it from the system. Then,
perform the transfer again.
If the transfer and erase
• •
operations are repeated multiple
times, the file structure within the
USB device becomes fragmented.
Refer to the operating instructions
of the USB device on how to deal
with this problem.
The USB device was disconnected
• •
or the power was turned off
during transfer. Delete the
partially-transferred file, and
perform the transfer again. If this
does not fix the problem, the USB
device may be broken. Refer to the
operating instructions of the USB
device on how to deal with this
problem.
67
GB