Troubleshooting - Shop-Vac H87 series User Manual

Workshop assistant wet/dry vac
Hide thumbs Also See for H87 series:
Table of Contents

Advertisement

Available languages

Available languages

FIGURE 22
NOTE: The cleaner should be stored indoors.
BEFORE DOING ANY WORK ON YOUR VACUUM, TURN THE UNIT OFF AND DISCONNECT THE PLUG
FROM THE WALL OUTLET.
PROBLEM
Loss of suction
wet pick up
Loss of suction
dry pick up
Loss of suction or misting
during wet
pick up
47. A hose holder has been
provided for easy storage of
the hose. Remove accessory
from end of hose. With hose
connected to tank inlet and front
of unit facing you, wrap hose
around top of the tank cover in
a clockwise direction. Secure
end of hose by clipping it in hose
holder attached to right side of
tank cover. FIGURE 22.

TROUBLESHOOTING

CAUSE
Clogged filter
Full tank
Full tank
Clogged filter
Full disposable filter bag
Full tank
Saturated filter
SOLUTION
Clean filter, see steps 14-18 on page 6, and steps
35-38 on pages 7 and 8.
Empty tank, see step 40 on pg 8.
Empty and clean tank.
Clean filter, see steps 14-18 on page 6.
Remove bag or replace with new.
Drain and clean tank, see step 40 on page 8.
Clean filter, see steps 30 on page 7.
PAGE 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents