Storage; Troubleshooting - Shop-Vac ESSSQ550 User Manual

STORAGE

FIGURE 33
BEFORE DOING ANY WORK ON YOUR VACUUM, TURN THE UNIT OFF AND DISCONNECT THE PLUG
FROM THE WALL OUTLET.
PROBLEM
Suction weakens or
cleaner runs hot
Misitng in the
exhaust air
WARNING!
IF ANY OF THE MOTOR HOUSING PARTS SHOULD BECOME DETACHED OR BROKEN, EXPOSING THE MOTOR
OR ANY OTHER ELECTRICAL COMPONENTS, OPERATION SHOULD BE DISCONTINUED IMMEDIATELY TO
AVOID PERSONAL INJURY OR FURTHER DAMAGE TO THE VACUUM. REPAIRS SHOULD BE MADE BEFORE
REUSING THE VACUUM.
56. Before storing your vacuum
cleaner the tank should be
emptied and cleaned. The
power cord can be wrapped
around the cord wraps on
the side of the tank cover.
FIGURE 33. Not standard
with all models. If your
vacuum does not include cord
wraps, power cord can be
wound around the tank cover
for your convenience.
NOTE: THE CLEANER
SHOULD BE STORED
INDOORS.

TROUBLESHOOTING

CAUSE
Clogged filter
Air leak
Obstruction in hose
or nozzle
Saturated filter
SOLUTION
Brush dirt from filter. If condition continues, change
filter.
Check all fittings for tight fit (nozzles, hose, etc.)
Check that tank cover is sealed properly.
Check nozzle, hose, etc. for obstructions, and
remove if present.
Replace saturated filter with a dry filter.
PAGE 9