Download Print this page

Midea SB 80-9373 User Manual page 11

24 inch ada standard build in dishwasher

Advertisement

For your convenience, we have placed the drain pump and filtering system within easy reach inside the tub.
There are three components of the filtering system: the main filter, the coarse filter, and the fine filter.
2
1
3
It is nece ssary to clean th e sp ray arms regularly because hard water chemic als will clog the spray arm jets and
bearings. Wash the arms in soapy and warm water and use a soft brush to clean the jets. Rep lace them after rinsing
them tho roughly.
1
Step
Turn the filter in anti-clockwise direction,
then lift it up.
2
Step
lift the Main filter up
3
Step
lift the Fine filter up
If do it from step1 to step 3, the filter system will be removed; Reverse operate by placing the
main filter ,then screw up the fine filter to finish installation
Main filter
Food and soil particles trapp ed by this filter are pulverized by a special jet on
the lower spray arm and washed down the drain.
Coarse filter
Larger items, such as pieces of bone or glass, that could clog the d rain are trapped
in the coarse filter. To remove an item cau ght in this filter, gently squeeze the tabs
on top of this filter and lift it out.
Fine filte r
This filter holds s oil a nd food residue in the sump area and prevents it from being
rede posited on the dishes during a cycle.
If your dishwasher is left in an unheated place during the winter, ask a service technician to:
Cut off electrical power to the dishwasher. Remove
fuses or trip circuit breaker.
Turn off the water supply and disconnect the water
inlet pipe from the water valve.
Drain water from the inlet
(Use a pan to catch the water.)
pipe
and water valve.
9
Reconnect the water inlet
water valve.
Remove the plastic sump cover in the
tub the bottom and use a sponge to
soak up water in rubber boot.
pipe
to the

Advertisement

loading