Troubleshooting Guide - Bay Tek Games Arctic Chomp Service Manual

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +561.391.7200

TROUBLESHOOTING GUIDE

Symptom
An extra Dot on Display Board.
Part of a display is not showing
Display not functioning
properly.
Counters do not work.
Game counter clicks at start
of each game.
Ticket counter clicks as
tickets come out of game.
AC cabinet lighting not
working.
Probable Cause
The Dot means an error
has occurred.
Segment faulty.
Display not receiving
correct signals from
main board.
Faulty Main Board
The 2 wires crimped
together may be faulty
Faulty Cable.
Faulty Main Board.
Cable problem from
power supply to LED
lights.
21
Remedy
Refer to Error Code Section.
Replace display board. (AABD2603)
Refer to Display & Speaker Wiring Diagram.
Communication problem with main board.
Check AACE2603 cable (J10) on main board.
Replace main board if possible to isolate the
problem to the main circuit board.
Inspect crimp to ensure good connection.
Check cables from counters to main board.
(AACO1000, AACE3201)
Replace main board. (A5NEWGEN1)
Check LED lights (AACE1253) for broken or
disconnected wires.
Check cable to power supply (AACE1258) to
ensure it is connected to power supply.