Bay Tek Games Arctic Chomp Service Manual page 24

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +561.391.7200
HOW TO:
ACCESS BALL COUNT SENSOR & BLOWER MOTOR
Unplug game to ensure balls will not blow around as game is being disassembled.
Unlock back door and remove from game.
The black plastic track will be removed from game.
Remove 2 screws from top of black track. Remove these 2 screws from side of black track.
One in left side, one in right side. One in left side, one in right side.
Black plastic track can now be slid up and out of cabinet.
Remove these 2 screws to remove Ball area is now exposed. Remove any broken
wood top cover of ball area.
balls from area and clean ball tracks.
Ball count sensor can now be seen and tested or replaced if needed.
If blower motor needs to be accessed, remove balls and continue to next steps.
Remove these 5 screws to remove wood
Remove these 4 screws to remove blower
cover of blower.
assembly.
25