PCE Instruments PCE-TC 9 Manual page 8

In fusion mode and overlay mode:
press ˃ to optimize the overlay and infrared picture
-
press ˂ and ˃ to view the pictures
-
press ˂ to freeze the infrared picture and press again to cancel
-
press ˅ and ˄ to zoom in and out
-
After pressing hot key 2, the instrument is in area measurement mode (LED flashes yellow):
- to choose the measuring spots:
press the arrow keys to move the measuring spot in the desired direction.
- to choose measurement and scan line:
press arrow keys to move measurement and scan line in the desired direction
- to choose the area:
use arrow keys to set the area (move area). Use arrow keys to set the size of the area (size of
area).
- to choose and set the thermal overlay area:
use left and right arrow keys to set the limit of the temperature overlay. Use up and down arrow
keys to set the slide bar of the thermal image.
- to choose the colour palette or temperature limit:
press left / right to set the colour palette and up / down to set the temperature limit.
8. Menu / Enter key:
The key has different functions in different modes:
o
real-time infrared mode: opens the main menu
o
menu-mode: confirms a function
o
real-time infrared mode: press and hold to correct a measurement value manually
o
image mode: press and hold to leave the mode
9. and 10.: manual focus: (T/W) key:
Press to get a better picture if the auto focus function is not sufficient.
11. and 12. CW /CCW picture mode:
Press to choose between different modes.
13. Shutter key:
Save current picture.
Manual
8