1. Switch the vehicle ignition on and the radio on (radio frequency or disc track number will be shown on the display
panel).
2. Press and hold the Time/Frequency (T/F) button approximately 2 seconds until the time display appears with AM or
PM and the colon ( : ) flashing. Release the T/F button.
3. Press the Down Tuning button (
the minutes to the correct time.
4. When the correct time is shown on the display panel, wait 5 seconds for the display to return to the normal indication.
If a problem should develop while operating the CD player, the following error codes may be displayed on the display panel:
INF-1: Indicates mechanical malfunction. Press the Reset button
INF-2: Indicates mechanical malfunction. Press the Reset button
INF-3: Indicates mechanical malfunction. Press the Reset button
INF-4: Indicates disc focus error. Press the Reset button
INF-5: Indicates disc focus error. Press the Reset button
INF-6: Indicates mechanical malfunction. Press the Reset button
INF-7: Indicates data error. Press the Reset button
INF-8: Indicates disc reading error. Eject the disc, make sure it is clean, undamaged, and loaded correctly (label side up). Re-
load the disc and check for proper operation or try another disc.
INF-9: Indicates disc lever error. Press eject button.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
SETTING THE CLOCK
) to adjust the hours and the AM/PM indication, and the Up Tuning button (
CD PLAYER ERROR CODES
.
.
.
-9-
.
.
.
.
) to adjust