Table of Contents
Advertisement
OPERATING INSTRUCTIONS
POWER (PWR) BUTTON
Press this button to turn the unit on and off. When the ignition switch is
on, the radio will turn on automatically when the CDC, BAND or AUX
button is pressed.
VOLUME CONTROL
To increase the volume level, rotate the VOLUME control in the clock-
wise direction. The volume will increase and the level will be shown
on the display panel from a minimum of V -0 to a maximum of V -46
To decrease the volume level, rotate the control in the counterclock-
wise direction. The display will automatically return to the normal indi-
cation 5 seconds after the last volume adjustment or when another
function is activated. This control is also used in conjunction with
the SEL/LOUD button to adjust the bass, treble, balance and fader
levels as described in
,
,
and
SELECT (SEL)/LOUD BUTTON
This button is used to select the audio function (volume, bass, treble,
balance or fade) to be adjusted using the VOLUME control.
3,4,5,6,7,8
34
31
13,14,15
17
1
SEL
PWR
LOUD
CDC/
O LUM E
5
DISC
V
DISC
SEL
PCD-5
BAND
2
AUX
9
27
26
.
16,32 28,29
10,18,19
REL
4x40 WATTS
1
2
TUNE
3
AS/PS
5
TRK
4
1
2
3
RPT
4
5
6
MEM
SCN
RPT
RDM
PGM
T/F
A-B
CLR
20 21 22 23
25
24
12
Pressing the Select button once will set the unit for volume adjust-
ment (VOL will momentarily appear on the display panel, followed a
few seconds later by V -- and the setting number). Pressing the button
additional times will select bass adjustment (BAS on display panel),
treble adjustment (TRE), balance (BAL), fader (FAD), and volume (VOL)
again. The display will return to the normal indication 5 seconds
after the last adjustment or when another function is activated. Refer to
paragraph
for the LOUD function of this button.
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the
SEL/LOUD button until the BAS indication appears on the display panel.
Within 5 seconds of choosing the Bass mode, rotate the VOLUME
Control to adjust the bass response as desired. The bass level will be
shown on the display panel from a minimum of B -6 to a maximum
of B +6 (B 0 represents flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
-3-
33
11
30
Advertisement
Table of Contents
