Operating The Radio - Aux In; Tone - perfect pro Workman Instruction Manual

OPERATING THE RADIO – AUX IN
A 3.5mm stereo Aux In socket is provided on the side behind the rubber cover, for
connecting an external audio device such as MP3 player or CD player.
1. Connect a stereo or mono audio source to the Aux In socket.
2. Press the Source button to select AUX input. Display will show "AUX IN".
3. Play the external player.
4. Adjust the volume of both the radio and the player for comfortable listening.
Note: Make sure the rubber cover is closed well after use to prevent moist and dirt from
entering the radio.
The Auto-Power management function will be activated in AUX mode. If there is no
signal from the AUX input jack for a period over 15 minutes, the unit will automatically
switch to standby mode. The operation indicator and the LCD will go off in such case.
Pressing the On/Standby button will wake up the unit.

TONE

The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to turn on the radio.
2. Press the Volume knob, the display shows "BASS 0".
3. Rotate the Volume knob to set the desire Bass level.
4. Press the Volume knob to confirm, the display shows "TREBLE 0".
Rotate the Volume knob to set the desire Treble level.
5.
6. Press the Volume knob to confirm and return to normal display,
9