Atag MadQ/2 User Manual page 40

Special programs
Emission measurement
(for authorized installer)
E E M M I I S S S S I I O O N N
m
-7 7 2 2 5 5
2 2 0 0 : : 0 0 0 0
min
Stopping the emission measurement prematurely
°C
Current heat-
generator temperature
Remaining time
after activation
GB
Key for the emission measurement by autho-
rized person.
If this key is pressed, all heating and domestic hot water
circuits are regulated to their maximum temperature
settings.
The period of the emission measurement is limited to 20
minutes and can be activated again afterwards. The
time remaining for the measurement is shown in the
display.
The emission measurement can be stopped premature-
ly by pressing the key ¡ ¡ again.
Attention: The domestic hot water temperature rea-
ches the level of the set maximum dome-
stic hot water temperature. Danger of
!
scalding if set too high!
Page GB-40