Timeprograms - Atag MadQ/2 User Manual

DAY/ HEATINGSTART
MONTH selected cycle
back forward
TIMECHANGE
HEATINGEND
SUMMER - WIN-
selected cycle
TER
back forward
TEMPERATURE
selected cycle
Parameter 03
CONTROL MODE
common (1)
)
separate (2
back forward
Parameter 04 Selection and modification of parameters
SUMMERSHUT-
and setting values
DOWN
Heating limit
When entering the programming level, the TIMEPROGRAMS-level will always
appear first. All other levels can be selected with the rotary pushbutton (if neces-
back forward
sary after entering the required code).
The selected and flashing level is activated by touching the rotary pushbutton, the
Parameter 11
first value or parameter flashes. If necessary, it can be changed by means of the
RETURN TO
STANDARD DISPLAY
rotary pushbutton and subsequently accepted by quickly pressing the button once
again. If necessary, the other parameters should be treated in the same way.
Return to the previous step by means of button ¤
back forward
means of button ¢
RESET
Factory setting
reactivate
back forward
GB
¤ , return to standard display by
¢ or automatically after approx. 60 seconds.
Page GB-15