Auto Search - Hitachi LP-WU9750B User Manual

Dlp laser projector
Hide thumbs Also See for LP-WU9750B:
Table of Contents

Advertisement

OSD Menu description

Auto Search

ON
By enabling this function, the projector will automatically determine the source of input every time
it is turned on so that the user will not have to make the selection on the OSD Menu.
OFF
Setting the function off will require the user to specify source of picture input on the OSD Menu in
order for the projector to display the intended picture.
Auto Power Off
The default value is OFF. If you set it to ON, the projector will automatically shut down after 20
minutes without any input signal.
Direct Power On
The default value is Off. If you set it to ON, the projector will automatically start up when it is
connected to AC power. If you plug the projector's power cord into an AC socket with a AC switch on,
you can use this function to start up the projector using the socket's switch instead of the remote. If
you do not need this function, please set it to Off.
Note: When the standby power set off. Even direct AC off, the LED Light still keep lighting until 25seconds. During this
period, the machine maybe can't power on normally.
Language
You can use this function to select the language you wish for the OSD Menu to be displayed in. You
can choose from the following nine languages:
English, French, Spanish, German, Chinese Simplified , Japanese, Korean, Portuguese and Chinese Traditional .
AMX D.D.
Support AMX device discovery.
Connect to http://www.amx.com/ get more information of this projector.
Web control/ Crestron Control
You can use "Web Control" function
including "Crestron Control" on this
projector.
To access the projector via the network from
your PC, input projector's IP address to
browser URL after network setting.(Refer
page 56)
For example: http://192.168.0.100/
Then you can access "Web Control" page.
"Crestron Control" is available by selecting
its sheet.
Further information about Crestron,
refer to http://www.crestron.com
PS: IP address is the one of your projector. For example: http://192.168.0.100/Crestron/PJeControl.html
....etc.
Recommended web browser : Internet Exprorer
Web browsers other than recommend ones may not work.
58
®
10/11.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents