Copyright Information - Hitachi LP-WU9750B User Manual

Copyright information

Copyright
Copyright 2016. All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieva l system or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,
without the prior written permission of this company.
The reproduction, transfer or copy of all or any part of this document is not permitted without express
written consent.
Disclaimer
This company makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular
purpose. Further, this company reserves the right to revise this publication and to make changes from
time to time in the contents hereof without obligation to notify any person of such revision or changes.
The illustrations in this manual are for illustrative purposes. They may differ slightly from your
projector.
Trademark
• DLP and Digital Micromirror Device (DMD) are trademarks of Texas Instruments. Others are
copyrights of their respective companies or organizations.
• Registered trademarks of HDMI Licensing LLC in the United States and other countries.
• Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of
America and other countries and areas.
• Crestron®, Crestron e-Control®, e-Control®, Crestron ConnectedTM, Fusion RV®, Crestron
RoomView® and RoomViewTM are trademarks or registered trademarks of Crestron Electronics,
Inc. in the United States and other countries.
• DICOM® is the registered trademark of the National Electrical Manufacturers Association for its
standards publications relating to digital communications of medical information.
• HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
All other trademarks are the properties of their respective owners.
Warranty and after-service
If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using
the projector immediately, then turn off the AC power , contact the dealer or service.
Otherwise if a problem occurs with the projector, first refer to "Troubleshooting", and run
through the suggested checks.
If this does not resolve the problem, please consult your dealer or service company. They
will tell you what warranty condition is applied.
Cooling fluid is need to check 3 years later after purchase. Please consult the dealer or service.
88