E Guide Frame Assembly B; F V Sensor Assembly - Epson TM-U375 Technical Manual

CONFIDENTIAL
Sub-assembly E
Assembly
Step
1
2
3
4
Sub-assembly F
Assembly
Step
1
2
5-10
Guide Frame Assembly B
Part Name
J holding roller shaft
J holding roller
Guide frame sub-assembly B
RE (1.5) x 1
Spring-J holding roller
RE (1.5) x 1
V Sensor Assembly
Part Name
V sensor sub-assembly
Sensor holder
Assembly Procedure
• Insert the J holding roller shaft into the J holding roller.
• Insert the J holding roller shaft into holes A and B of the Guide frame
sub-assembly B; then attach the E-ring outside of hole A.
• Engage the Spring-J holding roller on the J holding roller shaft;
then attach the E-ring to the shaft outside of the spring.
Assembly Procedure
• Insert the V sensor sub-assembly into the Sensor holder.
<Checkpoint>
• Verify that the V sensor sub-assembly is locked with pawl A.