Table of Contents
Advertisement
ACARD AEC-6880
4.4 RAID 0+1 Mode Installation
1. Complete the ACARD AEC-6880 hardware installation.
2. Boot-up the computer, press <F1> or <F10> toenter the RAID Setup
Utility.
3. Choose RAID 0+1 Mode and select the drives. Then press <Esc> to
save and quit the utility.
4. Restart the computer, press <F1> or <F10> to enter the RAID Setup
Utility.
5. Enter "Build Mirror Disk", press enter and confirm. Then the data will be
copied onto the selected drive.
6. Then press <Esc> to save and quit the utility. Restart the computer,
and install the ACARD AEC-6880 driver to the Operation System.
4.4.1 DOS Environment
Refer to Chapter 4.1.1 (refer to page 16).
4.4.2 Windows 95/98/ME Environment
Refer to Chapter 4.1.2 (refer to page 17).
4.4.3 Windows NT Environment
Refer to Chapter 4.1.3 (refer to page 20).
4.4.4 Windows 2000 Environment
Refer to Chapter 4.1.4 (refer to page 23).
4.4.5 Windows XP (Beta Version) Environment
Refer to Chapter 4.1.5 (refer to page 28).
36
Advertisement
Table of Contents
