Table of Contents
Advertisement
4.3 Mirror Mode (RAID 1) Installation
1. Complete the ACARD AEC-6880 hardware installation.
2. Boot-up the computer, press <F1> or <F10> to enter the RAID Setup
Utility.
3. Choose Mirror Mode (RAID 1) and select the drives. Then press <Esc>
to save and quit the utility.
4. Restart the computer, press <F1> or <F10> to enter the RAID Setup
Utility.
5. Enter "Build Mirror Disk", press enter and confirm. Then the data will be
copied onto the selected drive.
6. Press <Esc> to save and quit the utility. Restart the computer, and
install the ACARD AEC-6880 driver to the Operation System.
4.3.1 DOS Environment
Refer to Chapter 4.1.1 (refer to page 16).
4.3.2 Windows 95/98/ME Environment
Refer to Chapter 4.1.2 (refer to page 17).
4.3.3 Windows NT Environment
Refer to Chapter 4.1.3 (refer to page 20).
4.3.4 Windows 2000 Environment
Refer to Chapter 4.1.4 (refer to page 23).
4.3.5 Windows XP (Beta Version) Environment
Refer to Chapter 4.1.5 (refer to page 28).
35
ACARD AEC-6880
Advertisement
Table of Contents
