Striping Mode (Raid 0) Installation; Dos Environment; Windows 95/98/Me Environment; Windows Nt Environment - Acard AEC-6880 User Manual

ACARD AEC-6880

4.2 Striping Mode (RAID 0) Installation

1. Complete the ACARD AEC-6880 hardware installation.
2. Boot-up the computer, press <F1> or <F10> to enter the RAID Setup
Utility.
3. Choose Striping Mode (RAID 0) and select the drives. Then press <Esc>
to save and quit the utility.
4. Restart the computer, and install the AEC-6880 driver to the Operation
System.

4.2.1 DOS Environment

Refer to Chapter 4.1.1 (refer to page 16).

4.2.2 Windows 95/98/ME Environment

Refer to Chapter 4.1.2 (refer to page 17).

4.2.3 Windows NT Environment

Refer to Chapter 4.1.3 (refer to page 20).

4.2.4 Windows 2000 Environment

Refer to Chapter 4.1.4 (refer to page 23).

4.2.5 Windows XP (Beta Version) Environment

Refer to Chapter 4.1.5 (refer to page 28).
34