Build Mirror Disk; Other Functions; Exit Setup - Acard AEC-6880 User Manual

3.1.4 Build Mirror Disk

While a failed drive in a disk array, the starting screen will show the follow-
ing message:
Array_0 => bad mirror array !!
Array_1 => bad mirror array !!
You can run utility to build array or check drives status !!
Press <F1> or <F10> and select "Build Mirror Disk" for backup data to a
new hard disk. Press Enter and confirm, the data will then be copied to the
selected drive. After mirroring data finsh, remreber to restart the computer.

3.1.5 Other Functions

! ! ! ! ! Quick Erase Disk: Quick erase the hard drive content. Please beware,
that data and partition will be complete erased.
! ! ! ! !
Delete Array_0 & Delete Array_1: In general, when a failed disk in
disk array under RAID 0 (Mirror Mode). After change new drives, delete
the original Array setting. Then restart the computer to detect the new disk
and reset RAID mode.

3.1.6 Exit Setup

Press <Esc> to quit the RAID setup utiltiy screen. Then choose the "Up-
date Data" or "No Update" to Exit.
15
ACARD AEC-6880