Specifications - Peavey Mixer User Manual

Specifications

Specifications
MECHANICAL
Dimensions (H x W x D)
Weight
Mounting
Connections
PERFORMANCE
(Test Conditions: 120 Vrms, 60 Hz line voltage maintained throughout testing. Reference: 0 dBu = 0.775 Vrms.)
INPUT SPECIFICATIONS
Equivalent Input Noise:
-128 dBu (Rs = 150 Ohms), typical
Preamp Gain Range:
10 dB -65 dB (MIC inputs)
-13 dB -44 dB (LINE inputs)
Input Impedance:
2K Ohms (MIC inputs)
>10K Ohms (LINE inputs)
>10K Ohms (INSERT inputs)
Priority (Channels 1 and 2):
0 dB to 9 dB
Phantom Power:
+48 Volts
Input Sensitivity:
MIC Inputs -61 dBu
LINE Inputs -40 dBu
INSERT Inputs +4 dBu
Maximum Input Level:
MIC Inputs +12 dBu
LINE Inputs +30 dBu
INSERT Inputs +21 dBu
Common Mode Rejection:
>70 dB 20 Hz - 20 kHz
GENERAL SPECIFICATIONS
Channel Clip LED:
Red LED lights 2 dB before clipping
Also lights to indicate mute on Channel 1 and 2 inputs
Output Level Indicators:
Red LED lights 2 dB before clipping.
Peavey Electronics Corp
1.75" x 19" x 9.38" (45 mm x 483 mm x 238 mm)
7.5 lbs., 3.4 kg
Single EIA Space Rack Mount
Removable "Euro" Connectors for single Channel audio inputs, outputs and bus
link. IEC receptacle for AC power.
OUTPUT SPECIFICATIONS
Frequency Response:
75 Hz (-3 dB) to 20 kHz (-1 dB)
(at +4 dBu; ref: 1 kHz; 75 Hz HPF)
THD:
<0.1% at +4 dBu
(22 Hz - 22 kHz BPF)
Signal/Noise:
(Rs = 150 ohms; 30 kHz LPF)
>85 dB (all controls fully CCW)
Output Impedance:
<200 Ohms
Nominal Output Level:
LINE Level Output +4 dBu
MIC Level Output -26 dBu
INSERT Outputs +4 dBu
Maximum Output Level:
LINE Level Output +21 dBu (Hi-Z load) +18 dBu (600 load)
MIC Level Output -9 dBu (Hi-Z load) -12 dBu (600 load)
INSERT Outputs +21 dBu (Hi-Z load)
Yellow LED lights at +4 dBu.
Green LED lights at -16 dBu.
Power Requirements:
120 V RMS, 60 Hz Domestic
230 V RMS, 50/60 Hz Export
15 watts nominal
Page 21