Braking Lamp; Reverse Lamps - Chery A1 2008 Operating Instructions Manual

INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
direction indicator lamps
combination instrument will also light.

Braking Lamp

When brake pedal is pushed down, brake
lamp will immediately light. Release the
brake pedal and the brake lamp will go
out.

REVERSE LAMPS

With the ignition switch on, the backup
lamp is on when the vehicle is in the
reverse gear. The light goes out when the
ignition switch is off or the vehicle is
changed to other gears.
on the
Reversing Radar Set
( )
The vertical detection distance of
this reversing radar is within a range of 1m
while its right-and-left horizontal detection
distance is within a range of 2.8m.
The rearward detection distance of probe
is within a range of 1.5m from it.
As shown in the figure:
Detection sketch map
Sketch map of vertical detection range
Sketch map of horizontal detection range
This apparatus includes a combination of a
display and a buzzer, which locates inside
the vehicle behind the high position brake
lamp.
When shifting in reverse gear, the
reversing radar will automatically start up
to detect obstacles. At this time, the
figures "88" will be seen to light on the
display through inside rear view mirror,
meanwhile, a chirping will be heard.
Display
In case any obstacle appears within the
Status of left obstacle
detection range, when it is only 1.5m from
the probe, the figure "1.5" will be seen to
appear on the display through the rear
view mirror, which indicates that the
obstacle is only 1.5m from the vehicle tail;
Unit: cm
when further backing up the vehicle, the
figures "1.4, 1.3, 1.2, 1.1, 1.0, 0.9, 0.8, 0.7,
0.6. 0.5, 0.4" will appear on the display.
When the distance is between 1.5m and
Status of right obstacle