Williams Sound PLA-240 User Manual page 5

left connected to the amplifier. Do not leave spare cable coiled around the spool. Always
disconnect the unit from power before making connections.
Connect Loop Wire to the Loop Output Terminals
Push the tabs in (toward the amplifier) to open the hole and allow the wire in. Ensure that
only the bare wire goes into the hole and not the insulation . Release the tab to bind the
wire in the hole.
Loop
Amplifier
Loop
Amplifier
TV
TV
Loop Output Jacks
Loop Output Jacks
Push tab to open hole
Release tab to bind wire in hole
Push tab to open hole
Release tab to bind wire in hole
PLA 240 Small Room Loop Amplifier
TOSlink/ 3.5 mm
Optical headphone
TOSlink/
Optical
Used for
Digital
Audio
(Optical)
RCA
(white/re
3.5 mm
headphone
Headphone St
connector co
TV
a
Used for Hea
Digital con
Audio
(Optical)