Accessories - Graco PRO 5500wb Instructions-Parts List Manual

Waterborne Fluid Hoses
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
For connection between the voltage isolation system
and the spray gun; 0.25 in. (6.35 mm) I.D.; PTFE r
Shielded Hoses for use with the Graco H
Voltage Block:
Fluid Hose
Assy. Part No.
237920
237921
237922
Fluid Hose Replacement Parts
For fluid hoses 237920/921/922
Ref.
No. Part No. Description
301* 111450 O-RING
302 190143 BARBED FITTING
Waterborne Fluid Hose
* The three o-rings are included in Fluid Seal Repair Kit
237765.
Unshielded Hoses for use with the Graco H
Voltage Block:
Bare PTFE fluid hoses, without the ground shield. See
Manual 308688 for information on the hoses.
Fluid Hose
Assy. Part No.
238877
238878
Hoses for use with Graco Fenced Isolation
System:
Fluid Hose
Assy. Part No.
237548
237549
237550
56 308496

Accessories

Use Only Genuine Graco Parts and Accessories
2
O PRO
Hose Length
25 ft. (7.6 m)
36 ft. (11 m)
50 ft. (15.2 m)
Qty.
*301
302
05342
2
O PRO
Hose Length
25 ft. (7.6 m)
50 ft. (15.2 m)
Hose Length
25 ft. (7.6 m)
36 ft. (11 m)
50 ft. (15.2 m)
Hoses for use with non-Graco voltage
isolation systems**:
Fluid Hose
Assy. Part No.
237545
237546
Fluid Hose Replacement Parts
For fluid hoses 237545/546
Ref.
No. Part No.
301* 111450
302 190143
303 112480
3
1
302
*301
* The three o-rings are included in Fluid Seal Repair Kit
237765.
** The Graco warranty is void if the spray gun is connected
to a non-Graco voltage isolation system.
Hose Length
25 ft. (7.6 m)
50 ft. (15.2 m)
Description
O-RING
BARBED FITTING
SWIVEL FITTING
303
Qty.
3
1
1
04324