Speaker & Burial Cable Connections; Speaker Direction & Settings - Paradigm GO4 Owner's Manual

WIRING & SPEAKER INSTALLATION (CONT'D)
Speaker & Burial Cable Connections
Combine and twist
(clockwise) the red
wires (as shown in
the diagram) from
the amp, speaker
and to the next
speaker . Secure
these three wires
using the provided
silicone-filled
wire connectors;
Repeat procedure for Black wires . NOTE: you may have
to cut some of the speaker cable emanating from the
speaker to a more manageable size .
Speaker Direction & Settings
1 . Aim the speaker by loosening the screw in the
speaker arm and re-tightening once the desired aim is
achieved .
2 . Once your system is setup, set the dial on each
satellite speaker to correspond with the number of
satellite speakers and subwoofers in the installation
(see 'Audio Settings Chart' on page 15) .
GO4
7.5 W
11 | EN
To Speaker
To Adjoining
To Amp
Speaker
3.75 W