M6 Spring Lock Washer M10 Square Washer M10 Jam Nut M10 Fender Washer M10 Spring Lock Washer M10 Nut MikroTik Antenna assembly preview MikroTIK Radio back* front *The preview is valid if a MikroTik RB900 series outdoor device (sold separately) is installed.
Page 2
3. Attach MikroTik Radio to Mounting Bracket Attach a MikroTik RB900 series outdoor device to Case Holder [F] using: [-] M3x8 Bolt x 4 pcs (comes with MikroTik Radio) - see Fig. 3.1. Attach Case Holder [F] to Mounting Bracket [D] by tting Case Holder’s hinges into the Back Plate’s ange - see Fig.
Page 3
FIG. 5.2 FIG. 5.3 6. Attach Antenna to Pole MikroTik Antenna is design to t the pole diameter up to 100mm( 3.9”). Attach MikroTik Antenna to pole as shown in Fig. 6 using: [E] Pole Clamp x 2 pcs; [S] M10 Fender Washer x 4 pcs;...
Page 4
Hardware. MikroTik warrants all RouterBOARD series equipment for the term of twelve (12) months from the shipping date to be free of defects in materials and workmanship under normal use and service, except in case of damage caused by mechanical, electrical or other accidental or intended damages caused by improper use or due to wind, rain, re or other acts of nature.
Need help?
Do you have a question about the D-5G-30D3-PA and is the answer not in the manual?
Questions and answers