Entering Data; Entering Special Characters/Symbols - Paxar TC6039OH Operator's Handbook Manual

Entering Data

Entering data using the keypad is similar to entering data on a cell phone.
There are three data entry modes:
♦ Normal (Numeric) mode – Default. Press the key to display what
appears on the face of the key (numbers).
♦ Lower-Case Alphabetic mode – Press Alpha once to display lower-
case letters. Press the key several times until you see the letter you
need. For example, to select lower-case c, press Alpha once and 2
three times.
♦ Upper-Case Alphabetic mode – Press Alpha twice to display upper-
letters. Press the key several times until you see the letter you need.
For example, to select upper-case C, press Alpha twice and 2 three
times.

Entering Special Characters/Symbols

The table shows how to enter special characters and symbols when in
Lower-case and Upper-case Alpha Mode.
Press Lower-case Alpha Mode
Key Press Alpha Once
1 <space> : < ( '
0 . - + / *
4-2 Operator's Handbook
Upper-case Alpha Mode
Press Alpha Twice
<space> ; > ) "
. = @ % $