Removing The Lcd Bezel - Acer Aspire 4810 Series Disassembly Instruction

Removing the LCD Bezel

1. See "Removing the Battery Pack" on page 5.
2. See "Removing the Lower Cover" on page 6.
3. See "Removing the Lower Cover" on page 6.
4. See "Removing the Optical Drive Module" on page 7.
5. See "Removing the DIMM" on page 7.
6. See "Removing the Hard Disk Drive Module" on page 8.
7. See "Removing the SSD Module" on page 9.
8. See "Removing the RTC Battery" on page 9.
9. See "Removing the Keyboard" on page 12.
10. See "Removing the WLAN Board Module" on page 13.
11. See "Separating the Upper Case from the Lower Case" on page 14.
12. See "Removing the LCD Module" on page 20.
13. Remove the four rubber screw covers from the LCD bezel.
14. Remove the four screws (C) on the LCD module as shown.
Step
1~4
32
Size (Quantity)
M2.5 x L3.5 (4)
Color
Silver
Torque
3.0 kgf-cm