Removing The Touchpad Lock Board - Acer Aspire 4810 Series Disassembly Instruction

12. See "Removing the Card Reader Board" on page 27.
13. Disconnect the Bluetooth module cable from the bottom of the card reader board.
14. Carefully pry loose and remove the Bluetooth module from the card reader board.
WARNING:The Bluetooth module is glued to the card reader board, only remove the Bluetooth module if it is
defective.

Removing the Touchpad Lock Board

1. See "Removing the Battery Pack" on page 5.
2. See "Removing the Lower Cover" on page 6.
3. See "Removing the Lower Cover" on page 6.
4. See "Removing the Optical Drive Module" on page 7.
5. See "Removing the DIMM" on page 7.
6. See "Removing the Hard Disk Drive Module" on page 8.
7. See "Removing the SSD Module" on page 9.
8. See "Removing the RTC Battery" on page 9.
9. See "Removing the Keyboard" on page 12.
10. See "Removing the WLAN Board Module" on page 13.
11. See "Separating the Upper Case from the Lower Case" on page 14.
29