Z-Wave - Radio Thermostat ct100 User Manual

Connecting the CT100 to a Z-Wave
The CT100 is a Z-Wave® compliant thermostat. It has an onboard
radio that can be connected to an existing Z-Wave® network. This
device can be used on a network with products from diff erent
vendors.
1. Set your primary controller to INCLUDE mode to add the
thermostat as a node on your network (see your specifi c
controller's User Manual for detailed instructions).
2. From the CT100's Menu screen, touch MATE under the radio icon.
The Network Include screen displays a large r1.
MANUAL
EMER
HOLD
HOLIDAY
TEMP
F F
RADIO
1
HVAC HVAC V V
SETUP SETUP
MATE MATE A
3. Touch MATE again. This initiates the network connection (mating)
Y ECON
PROGRAM
process. The MATE icon and the status indicator LEDs will blink.
When the CT100 has successfully joined a Z-Wave network, the
MATE icon is replaced by the LINK icon under the radio tower.
RADIO
1
1
4.
thermostat was successfully added to its network (see your
specifi c controller's User Manual for details.)
30
AUTO
F
RADIO RADIO
1 1 1 1
MATE MATE MATE MATE A A A
COOL
AUTO
TRUE
MEN MEN MEN MENU MEN EN EN E E EN EN EN E E E E N N N U
TEMPORARY MENU
Similarly, when you are trying to disconnect
from (leave) a network, the LINK icon
disappears when the node has successfully
left the network.
Your controller indicates that the
MENU
PM PM
F F
FILTER FILTER SWING SWING
DIFF
RECOVERY ECON
CALIBRATE CALIBRA TE ON PROGRAM
CT100 Operation Guide
Network
®
RADIO
1
HVAC HVAC V V
SETUP SETUP
MATE MATE A
RADIO
1
1

Z-Wave