1. Manuals
  2. Brands
  3. Avery Dennison Manuals
  4. Printer
  5. Monarch Pathfinder Ultra Platinum 9462
  6. Quick reference

Avery Dennison Monarch Pathfinder Ultra Platinum 9462 Quick Reference

Paxar monarch pathfinder ultra platinum quick reference
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Q U I C K R E F E R E N C E
This Quick Reference contains supply loading information and general care and
maintenance procedures for the Monarch® Pathfinder® Ultra® Platinum 6039™
printer. For more detailed information, refer to the Operator's Handbook
available on our Web site (www.paxar.com).
Information in this document supercedes information in previous versions.
Check our Web site for the latest documentation and release information.
G e t t i n g S t a r t e d
1. Review the printer safety information in the Regulatory Compliance
document provided with your printer.
2. Charge the main battery. Use either the Monarch® 9462™ or 9465™ battery
charger. Refer to the documentation with those chargers for more
information.
Important:
You must charge the main battery when you receive the printer,
even if you do not use it right away. Refer to the Operator's
Handbook for important battery safety information.
3. Insert the main battery into the printer.
4. Attach the safety strap found in the documentation package.
5. Load supplies in the printer.
6. Turn on the printer and wait 30 seconds for the desktop to load.
Your System Administrator must have already loaded an application in the
printer before you can use it.
Monarch®, Pathfinder® Ultra®, 6039, 9462, and 9465 are trademarks of Paxar Americas, Inc.
Paxar® is a trademark of Paxar Corporation.
Avery Dennison® is a trademark of Avery Dennison Corporation.
TC6039QR Rev. AE 1/08
©2005 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp.
All Rights Reserved.

Advertisement

Table of Contents
loading

Related Manuals for Avery Dennison Monarch Pathfinder Ultra Platinum 9462

Summary of Contents for Avery Dennison Monarch Pathfinder Ultra Platinum 9462

  • Page 1 Your System Administrator must have already loaded an application in the printer before you can use it. Monarch®, Pathfinder® Ultra®, 6039, 9462, and 9465 are trademarks of Paxar Americas, Inc. Paxar® is a trademark of Paxar Corporation. Avery Dennison® is a trademark of Avery Dennison Corporation.
  • Page 2 A t t a c h i n g t h e S a f e t y S t r a p 1. Turn the printer upside down, resting its top in the table. 2. Remove the stylus strap from the loop.
  • Page 3 C h a n g i n g t h e M a i n B a t t e r y Always take the main battery out of the printer when storing the printer and connect the Battery Backup Power.
  • Page 4 Note: If the printer does not have a main battery or is not connected to the Battery Backup Power, it loses its charge and the printer’s system settings. 5. Remove the main battery from the battery compartment. 6. Connect the Battery Backup Power as shown.

  • Page 5: Loading For Non-Peel Mode

    Loading for Non-Peel Mode 1. Feed the supply under the applicator roller and over the label deflector. 2. Close the supply cover. 3. Select Load Supply from the printer icon menu, choose your supply type, and then select Calibrate. Loading for Peel Mode 1.
  • Page 6 8. Close the cover completely. 9. Select Load Supply from the printer icon menu, choose your supply type, and then select Calibrate. R e m o v i n g S u p p l i e s i n P e e l M o d e ♦...
  • Page 7 Moves the cursor to the left in a menu. Arrow Pressing Fct + left arrow scrolls the cursor up in a menu. Backspaces in Alpha mode. On/Off Turns the printer on and off. Numeric/ Displays a numeric digit or letter. Alphabetic See “Entering Special Characters/Symbols” for more information.

  • Page 8: Entering Data

    C l e a n i n g t h e P r i n t e r Do not use sharp objects to clean the printer. Do not use household cleaners to clean the printer. Use isopropyl alcohol on the interior areas only (except where specified), never on the exterior.

  • Page 9: Cleaning The Pinch And Feed Rollers

    Cleaning the Pinch and Feed Rollers 1. Turn off the printer and open the supply cover. 2. Remove the supplies. 3. Turn the platen roller with your fingers and run a dry, lint-free cloth across the pinch and feed rollers as they turn. Make sure the rollers are clean all the way around.

  • Page 10: Cleaning The Scanner Flex Cable

    Occasionally, adhesive buildup appears on the scanner flex cable, as shown below. To clean the cable: 1. Turn off the printer and open the supply cover. 2. Inspect the scanner flex cable. At any place that adhesive buildup appears, clean the cable with 99% isopropyl alcohol and a cotton swab.
  • Page 11 Scan a bar code you have previously scanned correctly. Check bar code for voids. Run a scan test. Switch batteries/Make sure power is on. Push your stylus into the tiny hole under the left side of keypad and soft reset the printer.

  • Page 12: Error Codes

    Low battery. Recharge the battery. Waiting to dispense label. Press Enter. Printhead error. See your System Administrator. 790 – 791 Turn off the printer. Wait two seconds and turn it back on. 904 – 911 System error. See your System Administrator. SYSTEM System error.

This manual is also suitable for:

Monarch pathfinder ultra platinum 9465Monarch pathfinder ultra platinum 6039

Table of Contents