Setting Current Dayand Time; Installer System-Test - Honeywell T8611G Chmnothern IV User Manual

7"8611G CHRONOTHERM e IV DELUXE PROGRAMMABLE HEAT PUMP THERMOSTATS
IMPORTANT
Review the settings to confirm that they match
the system. Press Bun Program to exit the
fostal/er Setup. The thermostat has saved the
installer Setup changes and irlitiated a reset in
order to operate using the new settings. Be sure
to set the current day and time immediately
Setting Current Dayand Time
1. Press Set Current Day/Time.
NOTE_ On initial power up or after an extended
power loss, 1:00 pm flashes on the
display until a key is pressed.
m
M1_12
2. Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday,
Tue=Tuesday, Wed=Wednesday,
Thu=Thureday, Fd=Fdday, Sat=Saturday=
_0g.
T=
M1_13
3. Press Time A or Time _7 until the current time i_
displayed•
NOTE: Tapping the Set Current Day/Time wilt
change the time in one hour increments.
I_ 15 =
T_
MI0314
NOTE: If the current time is Daylight Savings
Time, press Daylight Time until DST is
displayed.
6=IS_
M1_15
4. Press Run Program.
MI0316
INSTALLER SYSTEM-TEST
Use the Instalter System-Test to check the thermostat
operation. Refer to Table 4 for a list of the available
system-tasts.
To start the system-test:
CAUTION
The minimum off time for compressors Is
bypassed during the Installer System-Test.
Equipment damage can occur if the compressor
is cycled too quickly.
Press and hold the increase • and decrease • keys at
the same time until 10 appears. All segments of the
display will be displayed before the 10 appears. See
Fig. 11 and 12.
Table 4.Tests Available InThe Installer System-Test.
Test
Number Systsm-Test Description
10-1 g Heating equipment can be turned on
and off
20-29 Emergency heat equipment can be turned
on and off
30*39 Coofing equipment can be turned on
and off
40-49 Fan equipment can be turned on and off.
60 O to Keyboard keys test
60 19
70-79 Thermostat information including date
code and software versions are displayed
] _StartTinte_TernporarySet_ng Enrg I
Holdfor O Sav
I r_m_=llt I_ll _ gl=,l PM I_J l_ll|l_%Humid I
MonTueWedThu F riSatSun • Heat COOl• Outdoor
WakeLeaveReturnSleep In Recovery Auto Repl Batl
ErnHeat_OffCool_Auto ; Wait O_•I _¢.)OnAuto
--System ............... . DST .-Fan .........
MI_S
Fig. 11. Display of all the segments of the LCD.
I£/
_,- 1-EST NUMBER MI C_TA
Fig. 12. Display o1 test number.
7 69_936-_1