Denon DN-500AV Getting Started page 9

2
Connect this unit to the television using an HDMI cable
(sold separately)
NOTE
If this unit is connected using cables other than the HDMI cable, the Setup Wizard
will not be displayed.
3
For details on how to operate the television, see the television instruction manual.
HDMI IN
(ARC)
4
Español Français
Turn the television power on, and switch the video input to
this unit (HDMI input)
q Power on
w Switch to the input connected to this unit (HDMI)
Insert the provided batteries into the remote control unit
q Slide the rear lid in the direction of the arrow and remove it.
w Load the two batteries properly as indicated by the marks in the battery compartment.
R6/AA
e Put the rear cover back on.
DEutsch EnGlish
vStart Setup Wizard on next page
3