Denon DN-500AV Getting Started page 11

Basic operation of Setup Wizard
Speaker Connection
Please select the
speaker configuration
to be used.
5.1ch
7.1ch
Others
Move to the item that
5.1ch is the most
you want to configure popular surround
system.
ui
using .
Speaker Connection
5.1ch is selected for speaker
system. Select Yes to confirm.
Move to the item that
Yes
you want to configure
o p
using .
Setup Wizard
Do you wish to stop
and exit wizard?
You can restart the
setup wizard anytime
using the on screen
menu.
Returns to the start of
each setting.
or
Cancels the Setup
Wizard.
1
Insert the main unit power plug into the wall
socket.
U.S.A and Canada models
To household power outlet (AC 230 V, 50/60 Hz)
European,U.K and Asia/Pacific models
No
Use the voltage selector to switch the voltage according to your
region.
(It is set to 230V at the time of purchase.)
• U.S.A and Canada : 120 V
• European and U.K : 230 V
• Other Countries : Switch the voltage according to your region.
2
Yes
Press ZONE SELECT
No
(MAIN ZONE).
Switch the zone mode
J
Lights
• This remote control can be operated in two separate zones, MAIN
ZONE and ZONE2.
• Set the remote control to MAIN ZONE to operate the Setup
Wizard.
To enter the power standby mode
STANDBY X
Press ( ).
GPower indicator status in standby modeH
• Normal standby : Off
• When "HDMI Control" (vm page 68) is
set to "ON" : Red
NOTE
During power standby, a minimal amount of power is consumed. To
totally cut off the power, remove the power cord from the power
outlet.
Español
Getting Started
3
• This remote control is a preset remote control that can be used to
control connected devices.
4
Power cord
(Supplied)
to switch the zone mode to J
5
• To start the Setup Wizard again after exiting it, select "Setup Wizard"
in the menu (vm page 54 "Menu map").
• To exit the Setup Wizard, press one of the input source select
buttons on the remote control during the Setup Wizard.
Français DEutsch
Press AMP to set the remote control unit to AMP-
operation mode.
Switch the AMP-operation mode
Z
ON
Press ( ) to turn on power to the unit.
The power switches on, and the Setup Wizard start screen is
displayed on the television screen.
Power on
Setup Wizard
This wizard assists
1. Language Select
connection and setup
2. Speaker Connection
of receiver step by
step. You can skip or
3. Source Setup
cancel each section if
4. Remote Setup
necessary. Press [ENTER]
on remote to start.
5. Network Setup
START
Complete
Press ENTER .
Start the Setup Wizard.
Setup Wizard has started.
Please follow the message on screen.
EnGlish
5