Printing Serial Bar Codes; Adjusting Print Positions - Paxar 9840CL User Manual

design formats using the appropriate non-print zones.
do not leave the printhead closed (in the locked position) longer than 30 minutes
without printing. Open (unlock) the printhead before a break period, at the end of
each shift, and at the end of each day.

Printing Serial Bar Codes

Currently, the 9830CL printer does not support printing serial (ladder) bar codes.
Parallel (Picket Fence) Bar Code

Adjusting Print Positions

You can adjust the supply, print, and margin positions by using the control panel
buttons. Make sure a batch is not waiting to print, the printer is not paused, or has an
error before you change the settings.
To change the supply, print, or margin positions:
1. Press Pause.
2. Press Feed and Clear (at the same time) once to select the supply position, twice to
select the print position, and three times to select the margin position. These
buttons act as toggle switches between the three (supply, print, and margin) position
adjustments.
When you select the position to change, the current setting
3. Press Feed to decrease the current position by one dot or press Feed for two
seconds to decrease the value by 10 dots.
OR
Paxar Systems Group Paxar 9840CL Printer
is displayed.
Serial (Ladder) Bar Code
Printing - 3 23