Part Names And Functions - OEM RHPC-HD10 Operational Manual

DCC-SC01HD32

Part Names and Functions

6.
5
4
7
CN2
(NO MOUNT)
① Power Input and Video Output
With the bundled harness, poiwer input and video output signals are connected to a monitor.
Please refer to Chapter 7, "External connector pin assignment".
② OSD Operational Switch Connector
With the optional harness, OSD operational switch is connected.
Please refer to Chapter 7, "External connector pin assignment".
③ Remote Control Connector
Optional remote control cable (RE-300A) is connected.
With connecting the remote control cable (RE-300A) to a PC, serial communication via RS-232C is valid.
Please refer to the other materials for the communication details. (To be prepared)
④ Dedicated board camera lens
Lenses are optional.
⑤ Camera Mounting Holes
With bundled attachment screws, mount the camera.
⑥ Extended Connectors (Not implemented. Can be implemented on request.)
⑦ DC IRIS Connectors (Not implemented. Can be implemented on request.)
CN5
2
CN6
-
6
3 1
CN4
6
CN3
(NO MOUNT)
Rev.900-717-30-00