OEM RHPC-HD10 Operational Manual page 14

DCC-SC01HD32
PICTURE
Items SELECT
SHARPNESS SOFT
STD.
SHARP
GAMMA 0-127
CHROMA 0-255
BLEMISH OFF
COMP.
USER>
FACT.
EZOOM
Items SELECT
EZOOM ×1-×4
PAN 0-255
TILT 0-255
DISPLAY
Items SELECT
TITLE OFF
CHAR>
MODE OFF
ON
REMOTE SETTING
Items SELECT
BIT RATE 19200bps
9600bps
4800bps
2400bps
Next menu Explanation
Set the sharpness.
Set gamma. (Data 127:γ≒0.45)
Set chromaticness. Data 0: B/W
OFF pixel defect correction of image sensor (White spot).
ON pixel defect correction of image sensor (White spot) by user
→BLEMISH
COMP. setting. [ENTER] to go to the next menu to enable to correct
blemish by user settings.
ON pixel defect correction of image sensor (White spot) by
factory setting.
Next menu Explanation
Set magnification of electronic zoom.
When magnification ratio is more than x1, video output range
can be horizontally shifted.
When magnification ratio is x1, PAN value becomes 128 and the
video output range will return to the center.
When magnification ratio is more than x1, video output range
can be vertically shifted.
When magnification ratio is x1, PAN value becomes 128 and the
video output range will return to the center.
Next menu Explanation
OFF the display of title indication.
ON the display of the title indication.
→CAM
TITLE EDIT Alphanumeeric characters and symbols can be displayed.
[ENTER] to go to the next menu to enable to edit.
OFF the video format indication and electronic zoom indication
when the menu is undispalyed.
ON the video format indication and electronic zoom indication
when the menu is undispalyed.
When video format is changed, it is indicated and disappears
automatically after approx. 10 seconds.
When PAN, TILT, and EZOOM are changed, it is indicated and
disappears automatically after approx. 5 seconds.
Next menu Explanation
Set the speed of serial communication.
-
13
Rev.900-717-30-00