DCC-SC01HD32 Rev.900-717-30-00 Scope of Application This is to describe DCC-SC01HD32, anlog color HD (720P) board camera assembly. All specifications contained herein are subject to change without prior notice. Reproduction in whole or in part is prohibited. Handling Precautions The camera assembly must not be used for any nuclear equipments or aerospace equipments with which mechanical failure or malfunction could result in serious bodily injury or loss of human life.
DCC-SC01HD32 Rev.900-717-30-00 Product Outline DCC-SC01HD32 is a HD (720P) output, color board camera assembly utilizing 1/3 type CMOS image sensor. With our own image processing technologies, electrical zoom, long time exposure function, OSD functions, and others are incorporated into the camera. 32x32 +...
DCC-SC01HD32 Rev.900-717-30-00 Back Light Devided into 49 screens (7x7), and each screen can be individually masked. (21) (Masked part shall be ignored.) The same settings are applicable to ATW. Character Display Character Display: alphanumeeric characters and symbols (Max 24 letters) (22) Display Position: The upper left portion of the screen (fixed) Characters can be edited by OSD.
DCC-SC01HD32 Rev.900-717-30-00 Part Names and Functions (NO MOUNT) (NO MOUNT) ① Power Input and Video Output With the bundled harness, poiwer input and video output signals are connected to a monitor. Please refer to Chapter 7, “External connector pin assignment”. ②...
DCC-SC01HD32 Rev.900-717-30-00 External Connector Pin Assignment Power Input and Signal Output Connectors (Harness 2050) 7.1. Connectors of camera side Connectors of bundled harness side 53398-1090 (molex) 51021-1000 (molex) Signals Component Output RGB Output Pb/B OUT Pb output (3values SYNC) BLUE output (without SYNC) Pr /R OUT Pr output (3values SYNC) RED output (without SYNC)
DCC-SC01HD32 Rev.900-717-30-00 Camera Operating Instructions There are 3 different operating methods, operating with OSD menu, operating without OSD menu, and operating via PC with dedicated remote control cable connected to the remote control terminals. Depending on its operating methods, selectable camera settings are different. Please refer to the selectable settings by each operational method as below.
Page 11
DCC-SC01HD32 Rev.900-717-30-00 Main Menu Items SELECT Next menu Explanation GAIN Set AGC OFF to make Gain 0dB. AGC> Set AGC ON. →MAX GAIN [ENTER] to go to the next menu to enable to set the maximum Gain. MANUAL> Set Gain manually. →MANUAL GAIN [ENTER] to go to the next menu to enable to set the manual value.
Page 12
DCC-SC01HD32 Rev.900-717-30-00 MAX GAIN Items SELECT Next menu Explanation MAX GAIN 18dB Set the maximum gain of AGC. 24dB 30dB 36dB MANUAL GAIN Items SELECT Next menu Explanation MANUAL 0dB-36dB Set the manual gain. GAIN AES SETTING Items SELECT Next menu Explanation 8s,4s,2s,1s, Limit the low speed limitation of electronic shutter auto.
Page 13
DCC-SC01HD32 Rev.900-717-30-00 ATW SETTING Items SELECT Next menu Explanation Set the ATW range to 2200~9000K. ATW RANGE ATW1 Set the ATW range to 3200~6500K. ATW2 ATW RES SLOW Set the speed of ATW. MID. FAST R OFFSET 0-255 Adjust R offset value of ATW White standard. B OFFSET 0-255 Adjust B offset value of ATW White standard.
Page 14
DCC-SC01HD32 Rev.900-717-30-00 PICTURE Items SELECT Next menu Explanation SHARPNESS SOFT Set the sharpness. STD. SHARP GAMMA 0-127 Set gamma. (Data 127:γ≒0.45) CHROMA 0-255 Set chromaticness. Data 0: B/W BLEMISH OFF pixel defect correction of image sensor (White spot). COMP. USER> ON pixel defect correction of image sensor (White spot) by user →BLEMISH COMP.
Page 15
DCC-SC01HD32 Rev.900-717-30-00 BLC WINDOW SET Items SELECT Next menu Explanation window0~ 7x7(49) Set Mask ON/OFF for back light. Window window48 The masked area (whiteout part) will not be reflected by auto MASK exposure. [D]: to MASK ON and goes to the next area. SET/CLR [U]: to MASK OFF and goes to the next area.
DCC-SC01HD32 Rev.900-717-30-00 Factory Settings (Underlined and Bold letters show the factory settings) OSD Settings MAIN GAIN AGC> MAX GAIN 36dB MANUAL> MANUAL GAIN SHUTTER AES> SHUTT.LIM. 1/10k HIGH SHUTT.LIM. MANUAL> SHUTTER 1/250 SPEED WHITE_BAL ATW> ATW RANGE ATW1 ATW RES MID.
DCC-SC01HD32 Rev.900-717-30-00 Cases for Indemnity (Limited Warranty) We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in the following cases. In case damage or losses are caused by fire, earthquake, or other acts of God, acts by third party, deliberate or accidental misuse by the user, or use under extreme operating conditions.