OEM RHPC-HD10 Operational Manual page 11

DCC-SC01HD32
Main Menu
Items SELECT
GAIN OFF
AGC>
MANUAL>
SHUTTER OFF
FL
AES>
MANUAL>
WHITE_BAL ATW>
3200K
4800K
6500K
MWB>
AESET LEVEL>
RESPONS>
BLC>
OPTION PICTURE>
EZOOM>
DISPLAY>
REMOTE>
EXIT SAVE>
CANSEL>
DEFAULT>
Next menu Explanation
Set AGC OFF to make Gain 0dB.
Set AGC ON.
→MAX
GAIN [ENTER] to go to the next menu to enable to set the maximum Gain.
Set Gain manually.
→MANUAL
GAIN [ENTER] to go to the next menu to enable to set the manual value.
Set the electronic shutter OFF.
The same shutter speed set as frame rate will be set.
Set to be flickerless.
When the set frame rate is 60fps, and 59.94fps, 1/100s shutter
speed will be set, while the set frame rate is 50fps, 1/120s shutter
speed will be set.
Operate Auto electronic shutter.
→AES
SETTING [ENTER] to go to the next menu to enable LOW SHUTT, LIM
(limitation of electronic high sensitivity), and HIGH SHUTT LIM
(limitation of high speed electronic shutter).
Set the electronic shutter manually.
→MANUAL
SHUTTER [ENTER] to go to the next menu to enable to set the manual value.
Operate Auto White Balance.
→ATW
SETTING [ENTER] to go to the next menu to enable to set tracking range,
tracking speed, and OFF SET of convergent point.
Fix white balance to 3200K.
Fix white balance to 4800K.
Fix white balance to 6500K.
Set White Balance manually.
→MANUAL
WHITE BAL [ENTER] to go to the next menu to enable to set the manual value.
→AE LEVEL [ENTER] to go to the next menu to enable to set the blightness of
auto exposure.
[ENTER] to go to the next menu to enable to set the operational
→AE
RESPONS speeds of AGC, AES, and Auto Iris. Volume adjustment of Video
Iris can be checked as well.
[ENTER] to go to the next menu to enable to set back light setting.
→BLC
SETTING
[ENTER] to go to the next menu to enable to set the image
→PICTURE
sharpness, gamma compensation, saturation, and defective pixel
correction of the image sensor.
[ENTER] to go to the next menu to enable to set electronic shutter.
→EZOOM
[ENTER] to go to the next menu to enable to set the display settings
→DISPLAY
of title indication and electronic zoom magnifications.
[ENTER] to go to the next menu to enable to set the serial
→REMOTE
SETTING communication speed.
END Save the data set with OSD, and terminate the menu.
END Restore the data set with OSD, and terminate the menu.
END Restore the data to the initial settings, and terminate the menu.
-
10
Rev.900-717-30-00