OEM RHPC-HD10 Operational Manual page 13

DCC-SC01HD32
ATW SETTING
Items SELECT
ATW RANGE ATW1
ATW2
ATW RES SLOW
MID.
FAST
R OFFSET 0-255
B OFFSET 0-255
MANUAL WHITE BAL.
Items SELECT
ONE PUSH END
CAL.
RED GAIN 0-255
BLUE GAIN 0-255
AE LEVEL
Items SELECT
AE LEVEL 0-127
AE RESPONS
Items SELECT
AGC RES. 0-255
AES RES. 0-255
IRIS RES. 0-255
IRIS LEVEL 0-127
BLC SETTING
Items SELECT
BLC SETTING OFF
ON(3×3)
ON(USER)
>
Next menu Explanation
Set the ATW range to 2200～9000K.
Set the ATW range to 3200～6500K.
Set the speed of ATW.
Adjust R offset value of ATW White standard.
Adjust B offset value of ATW White standard.
Next menu Explanation
One push to set the manual white balance value automatically.
[D]: to go to END->CAL to start detection.
With completion, it goes to CAL->END and its results are
reflected in RED GAIN and in BLUE GAIN.
R/B OFFSET of ATW SETTING is to be reflected.
Gain adjustment of RED.
Gain adjustment of BLUE.
Next menu Explanation
Set the AE level.
Operate AGC, AES, and Auto Iris settings.
Next menu Explanation
Set the response speed of AGC.
The bigger the value goes, the slower the speed will be.
Set the response speed of AES.
The bigger the value goes, the slower the speed will be.
Set the response speed of Auto Iris.
The bigger the value goes, the slower the speed will be.
※Hunting may occur if the speed is too fast.
Set Video Iris typed Auto Iris lens.
Please refer to the usage method of Auto Iris lens.
Next menu Explanation
OFF back light. (Full Photometry)
ON back light. (Center 3×3)
ON back light.
→BLC
WINDOW With the next menu, window settings can be done.
SET
-
12
Rev.900-717-30-00