Display Setting - Macurco GD-6 User Instructions

Gas Selection
To select the Gas Option, in normal mode, press the Next button once to display the current gas selection (mE is Methane, Pro is
Propane and Hy is Hydrogen). Then press the Enter button twice to enter the selection menu. The currently selected gas will be
shown on the display. Press Next to scroll through the available gases selections. The selected gas will be flashing, press Enter to
select the gas and Enter again to confirm the selection. To return back to normal mode press Next until "End" is displayed and press
Enter.
Selecting Default Configuration – "dEF"
To select the Default Configuration, in normal mode, press the Next button twice to get to "Con" or the Configuration menu. Then press
the Enter button to enter the Con menu. The first selection is the "dEF" or Default setting. Press Enter. If it is already in Default
configuration, there will be no action. If it is not already in Default configuration, "nO" will be displayed. Press Next to change it to "YES"
(flashing) then press Enter to confirm the change (solid) and press Enter again to return to "dEF" in the Con menu. Press Next until
"End" is displayed then press Enter to return to normal operation.
Selecting Power Up Test Option – "PUt"
To select the Power Up Test Configuration, in normal mode, press the Next button twice to get to "Con" or the Configuration menu.
Then press the Enter button to enter the Con menu. Then press the Next button to get to the second selection "PUt" or Power Up
Test setting. Press Enter. If the test is "On" press Next to turn it "OFF" (flashing) then press Enter to confirm the change (solid) and
press Enter again to return to "PUt" in the Con menu. Press Next until "End" is displayed then press Enter to return to normal
operation.
Selecting Display Option – "dSP"
To select the Display Configuration, in normal mode, press the Next button twice to get to "Con" or the Configuration menu. Then press
the Enter button to enter the Con menu. Then press the Next button twice to get to the third selection "dSP" or Display setting. Press
Enter. If the display is "On" press Next to turn it "OFF" (flashing) then press Enter to confirm the change (solid) and press Enter again
to return to "dSP" in the Con menu. Press Next until "End" is displayed then press Enter to return to normal operation.
11