Table of Contents
Advertisement
Paxar Monarch 9640 Series
Connecting the Power Cord
2
1. Leave the power switch at the "O" position.
2. Connect the power supply plug to the power jack and the other end to your AC
source.
3. To switch on press on/off switch to "1" position.
AC power source
3
Connecting the Printer to Your Host
1. You can connect the printer with any standard Centronics cable to the parallel port of
the host computer.
2. Alternatively you can connect the printer with a serial cable to the RS232C port of
your computer or terminal. (for PC compatibles, the RS232C port is COM1, COM2 or
COM3)
Operators Handbook
9640 Series
3
English
Advertisement
Table of Contents
