Switch On Receiver; Installation; Menu Language; Raps Automatic Installation - Mirage smartSTREAM BOX2IP Quick Start Manual

3.1

Switch on Receiver

1. Switch on all connected devices.
2. Ensure that the correct AV input is selected at the TV set (i.e. that the signals from the receiver are
displayed).
3. Connect the mains plug to the power outlet to switch on the receiver
or
Connect the mains plug to the power outlet and switch on the receiver by using the power switch (on
the rear panel of housing) (I, ON).
3.2

Installation

After first switching-on or after resetting the receiver, various windows will open:
3.2.1

Menu Language

By default, the receiver language is preset to Deutsch [German].
Please ensure that the setting is correct; you may change your settings by correspondingly pressing

the keys PR+ and PR.
Confirm by pressing OK to go to the next window.

3.2.2

RAPS Automatic Installation

Your receiver is equipped with RAPS. RAPS means Receiver Automatic Programming System. RAPS
can automatically update the channel lists of your receiver.
You can cancel RAPS installation by pressing the key EXIT whilst the countdown of RAPS installation is
running (and also at a later point in time during installation).
The then displayed channel list is a preprogrammed factory list.
The respective up-to-date RAPS lists are available via the satellite Astra 19.2°. Correspondingly, RAPS
can only be used within the footprint of the satellite Astra 19.2°; furthermore, your system should be
suitable for digital Astra receiving.
3.2.3

RAPS Parameters

During installation, the third installation window Automatic Programming displays various parameters:
• Date of the RAPS file stored in the receiver
• Date of the RAPS file currently available on the satellite
• Number of available RAPS lists
• Number of satellites included in the RAPS file.
• Number of transponders included in the RAPS file
• Number of all channels in the RAPS lists
• Progress bar: informs on progress of download of the RAPS file
3.2.4

Satellite List

After completion of RAPS download and completed satellite scan (RAPS DiSEqC scan), the window
Satellite List will be opened. The window displays the satellites included in the RAPS file.
As the RAPS lists are available via the satellite Astra 19.2°, Astra 19.2° is already marked (and cannot
be deselected!).
Select a satellite by pressing the keys PR+ and PR-.

Press OK to select a non-marked satellite.

Press OK to deselect a marked satellite.

Operation of the Receiver
7