Spin Cycle - Miele W3038 Operating And Installation Instructions

Final spin speed
Program
Normal
Wrinkle-free
Sanitize
Handwash
Woolens
Silk
Custom
Extra White
Delicates
Denim/Jeans
Dress shirts
Pillows
Outerwear
Table linens
Beach towels
Express
Drain / Spin
Quick rinse
The final spin speed can be reduced, if
the program allows changes. The
selection of a final spin speed higher
than that shown above is not possible.
Rinse and interim spin
There is a spin cycle after the main
wash and between the rinses. A
reduction in the final spin speed will
also reduce the interim spin speed.
Max spin
High spin
Max spin
Med spin
High spin
Slow spin
Max spin
Max spin
Med spin
High spin
Med spin
High spin
Med spin
High spin
Max spin
Max spin
Max spin
High spin
Hold
The laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the program.
 Under the spin speeds, select
– Start final spin
At the end of the program, the
washing machine will offer the
maximum permitted spin speed. You
can select a lower spin speed.
 Press the Start button.
The final spin is carried out.
– End program without spinning
 Press the Cancel button.
The water is drained and the program is
ended.
No spin (deselect rinse and interim
spin and the final spin)
 Under the spin speeds, select
The laundry is not spun between the
rinse cycles and the end of the
program. The water is drained and the
anti-crease function is activated.

Spin cycle

Hold .
No spin .
21