Spin Cycles; Final Spin Cycle Speed; Rinse Cycle Spins; De-Select Final Spin (Rinse Hold) - Miele NOVOTRONIC W 1612 Operating Instructions Manual

Final spin cycle speed

Program
Normal
Wrinkle Free
Delicates
Woolens
Express
Colours
Dress Shirts
Denim/Jeans
Darks
Drain/Spin
You can reduce the final spin cycle
speed. Exception: In the Normal
program, the final spin cycle speed can
only be reduced to 1000 RPM or above.
It is not possible to select a higher final
spin cycle speed than indicated above.

Rinse cycle spins

The laundry is spun after the main wash
and between the rinse cycles. If you
reduce the final spin cycle speed, the
rinse cycle spin speed is reduced
along with it.

De-select final spin (Rinse hold)

^ Use the Spin speed button to select
RPM
the Rinse hold feature. After the last
1200
rinse cycle, the laundry remains in
1200
the water. This helps reduce creasing
600
if the laundry cannot be immediately
1200
removed from the drum upon
1200
program completion.
1200
– Start the final spin:
600
900
The washer automatically offers you
the highest possible spin speed.
1200
However, you can select a lower
1200
speed (RPM). Use the Start/Stop
button to start the final spin.
– End the program:
Press the Door button. The water is
pumped away. Next, press the Door
button again to open the loading
door.
De-select the rinse spin(s) and final
spin (none
^ Use the Spin speed button to select
the none
rinse cycle, the water is pumped
away and wrinkle protection is
activated. If this setting is used in the
Wrinkle free,, Express or Colours
programs, an extra rinse cycle will be
added.

Spin cycles

)
feature. After the last
19