Safety Warnings - kinetic T-2300 User Manual

SAFETY WARNINGS

RECOMMENDED SKEWER AND CONE COMBINATION*
We recommend using the skewer that was included with your trainer.
ADDITIONAL BIKE MOUNTING SOLUTIONS
STANDARD CONE CUP SLOTTED CONE CUP
PART NO: T-2111
Pre-installed on all Kinetic Comes in the trainer box
trainers and fits most and works with many
nutted axles and track non-Kinetic quick release
bikes. skewers.
KINETIC TRAXLE FINE
PART NO: T-2100
For fine-threaded 12mm thru-axle systems
including: Syntace X-12, DT SWISS (Tapered
and Flat) and Specialized
ACCESSORIES
(Available at kurtkinetic.com and Kinetic dealers)
RISER RINGS TRAINER MATS
Page 4
*FOR YOUR SAFETY
TRACK CONE CUP
PART NO: T-2103 PART NO: T-2104
An oversized version of the
Standard Cone Cup for track
axle nuts larger than 15mm.
KINETIC TRAXLE FINE XL
PART NO: T-2120
Same thread pitch as Fine Traxle, with wider
width. For Santa Cruz bikes with closed
dropout on the drive side -requires removal
of hex cap in drive side dropout.
SWEAT GUARDS
www.kurtkinetic.com
» Be sure that your bike is correctly installed and securely
locked into the trainer before riding.
» Do not over-tighten the roller tension knob. Over-tightening
will cause both tire and unit damage. Tighten only enough
to avoid tire slippage.
T-740
» When using the trainer for normal use or for extended
SHIPS IN
periods of time, the resistance unit will get hot. DO NOT
TRAINER BOX
touch the resistance unit while it is in use or while it is hot.
» Always consult a doctor before beginning any exercise
routine or using any fitness product including the Kinetic
Trainer. Should you become ill, feel dizzy, light-headed or
nauseous while riding the trainer, stop riding immediately
and seek medical attention.
» While in use, the wheel of your bike and the resistance
unit may be spinning at high speeds. For this reason keep
children, pets and all items safely away from your trainer
while in use.
» Always use the trainer on a flat surface.
» Single-speed bikes with nutted axles require an additional
standard cone cup for proper use.
(Ordering & information: kurtkinetic.com)
SHALLOW CONE CUP
PART NO: T-2105
Designed with a shallow
outside diameter to work on
any frame with a tight drive-
side dropout tolerance.
KINETIC TRAXLE MEDIUM
PART NO: T-2102
For medium-threaded 12mm thru-axle
systems including: SHIMANO SM-AX75 and
SM-AX65 142mm x 12mm
TRAINER BAGS
INTERNAL CA CONE CUP BMX CONE CUP
PART NO: T-2106 PART NO: T-2107
Works with chain-actuated For oversized 14mm bmx
internal hubs like Sturmey axles with axle nuts 19mm
Archer. Great for Brompton and larger.
bikes.
KINETIC TRAXLE COARSE
PART NO: T-2101
For coarse-threaded 12mm thru-axle
systems including: RockShox Maxle, Trek
APB Maxle and others
TRAINER TIRES PRO FLYWHEEL