Data Rates Dip Switch Setting S2 And S3 - Patton electronics 593/25, 593/45, 593/TB, RS-422, RS-485 User Manual

3.2 DIP Switch S1 & S4
The Models 593/25F, 593/45, and 593/TB features 2 four-position DIP
switches S1 and S4. Figure 3A (below) shows Models 593/TB & 593/45 top
view of the printed circuit board and where S1 and S4 are located. Figure 3B
shows Model 593/25 top view of the printed circuit board and the position of S1
and S4. Following figure 3A/3B is a detailed description on the different switch
settings and their functions.
S4
Figure 3A. Models 593/TB & 593/45 Location of JP7 Pins 1-4 & JP8 Pins 1-4
S4
Figure 3B. Model 593/25, Location of JP7 Pins 1-4 & JP8 Pins 1-4
3.2.1 2W/4W Interface S1-1, 2 and S4-1, 2
Switches S1-1, 2 and S4-1, 2 set up the interface for 2 wire or 4 wire
operation.
2 Wire 4 Wire
S1-1, 2 ON OFF
S4-1, 2 ON OFF
3.2.2 Receive Impedance S1-3 and S4-3
Switches S1-3 and S4-3 set the receive impedance for 120 Ohms or
high impedance.
120 Ohm High Impedance
S1-3 ON
S4-3 ON
7
S1
S1
OFF
OFF

3.3 Data Rates DIP Switch Setting S2 and S3

The table below shows the data rates DIP switch settings for S2 and S3.
Switches S2 and S3 must be set identically to operate properly.
Model 593 Series Data Rate Table
Switch Positions
S2 Position S3 Position 4800 bps
S2-3 S3-3 OFF
S2-4 S3-4 OFF
S2-5 S3-5 OFF
S2-6 S3-6 OFF
S2-7 S3-7 OFF
S2-8 S3-8 ON
Model 593 Series Data Rate Table (continued)
Switch Positions
S2 Position S3 Position 38.4 kbps 57.6 kbps 115.2 kbps
S2-3 S3-3 OFF
S2-4 S3-4 OFF
S2-5 S3-5 ON
S2-6 S3-6 OFF
S2-7 S3-7 OFF
S2-8 S3-8 OFF
Data Rates
9600 kbps 19.2 kbps
OFF OFF
OFF OFF
OFF OFF
OFF ON
ON OFF`
ON OFF
Data Rates
OFF ON
ON ON
OFF OFF
OFF OFF
OFF OFF`
OFF OFF
8