Model 2292 & 2294 Series Getting Started Guide
Location and mounting requirements
The SmartNode extender is intended to be placed on a desktop or similar sturdy, flat surface that offers easy
access to the cables. Allow sufficient space at the rear of the chassis for cable connections. Additionally, you
should consider the need to access the unit for future upgrades and maintenance.
Installing the SmartNode extender
SmartNode extender installation consists of the following:
•
Placing the device at the desired installation location (see section
page 25)
•
Installing the interface and power cables (see section
When you finish installing the SmartNode, go to chapter 4,
Mounting the SmartNode extender
Place the extender on a desktop or similar sturdy, flat surface that offers easy access to the cables. The extender
should be installed in a dry environment with sufficient space to allow air circulation for cooling.
Note
For proper ventilation, leave at least 2 inches (5 cm) to the left, right, front,
and rear of the SmartNode extender.
Connecting cables
Installing extender cables takes place in the following order:
1. Installing the RJ-11 voice port cable or cables (see
ports"
on page 26)
2. Installing the 10/100 Ethernet port cable or cables (see
3. Installing the power input (see
Installing the SmartNode extender
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
The Interconnecting cables shall be acceptable for external use and shall be
rated for the proper application with respect to voltage, current, anticipated
temperature, flammability, and mechanical serviceability.
"Connecting to external power source"
"Mounting the SmartNode extender"
"Connecting cables"
on page 25)
"Getting started with the SmartNode"
"Installing an interface cable on the extender's voice
"Installing the Ethernet cable"
on page 30)
3 • Hardware installation
on page 32.
on page 28)
on
25