Fujitsu LifeBook C Series Owner's Manual page 39

Problem
Video Problems
The built-in display A foreign object, such as a
does not close. paper clip, is stuck
between the display and
the keyboard.
If the spots are very tiny
The built-in display
and few in number, this is
has bright or dark
normal for a large LCD
spots.
display.
If the spots are numerous
or large enough to
interfere with your
operation needs.
The application You are running an
display uses only a application that does not
portion of your support 800 x 600/1024 x
screen and is 768 pixel resolution
display and display
surrounded by a
dark frame. compression is enabled.
The BatteryAid default is
The Display is dark
when on battery set on low brightness to
power. conserve power.
You have Your BIOS setup is not set
connected an to enable your external
external monitor monitor.
and it does not
display any
information.
Your external monitor is
not properly installed.
Your operating system
software is not set up with
the correct software driver
for that device.
You have Your external monitor is
connected an not compatible with your
external monitor LifeBook notebook.
and it does not
come on.
Possible Cause
Tr o u b l e s h o o t i n g
Possible Solution
Remove all foreign objects from the keyboard.
This is normal; do nothing.
Display is faulty; contact your support
representative.
Display compression gives a clearer but
smaller display for applications that do not
support 800 x 600 /1024 x 768 pixel
resolution. You can fill the screen but have less
resolution by changing your display
compression setting, (See the Video Features
submenu, located within the Advanced menu
of the BIOS.)
Press [Fn] + [F7] to increase brightness or
double-click on BatteryAid gauge and adjust
Power Control under battery settings.
Toggle the video destination by pressing [Fn]
and [F10] together, or check your BIOS setup
and enable your external monitor. (See Video
Features submenu, located within the
Advanced Menu of the BIOS.)
Reinstall your device.
Check your device and operating system
documentation and activate the proper driver.
See your monitor documentation and the
External Monitor Support portions of the
Specifications section.
31