Fujitsu LifeBook C Series Owner's Manual page 30

Problem
Optical Drive Problems
The Media Player The Windows media
Access indicator on player auto insert
the Status Indicator notification function is
active and is checking to
Panel blinks at
regular intervals see if a media disc is
ready to run.
when no disc is in
the tray or the
media drive is not
installed.
The media player The region code for the
DVD does not match that
will not play
international DVD of the media player.
titles
The LifeBook The media player software
notebook fails to has not been installed.
Auto-Play a DVD
movie.
22
Possible Cause Possible Solution
This is normal.
All Fujitsu notebook DVD players are set to
play DVD titles with region code number 3,
which is specified for the Asia market. The
region number is a regional restriction code
defined by the DVD Forum acting on the
requirements of Hollywood. Different region
codes are recorded on video DVD titles for
publication in different areas of the world. If the
regional code of the DVD player does not
match the regional codes on the titles, then
playback is impossible.
NOTE: You can change the region code on the
DVD player using the Properties menu of the
DVD software. Note, however, that you can
only change the region code up to four times.
After the fourth change, the last region code
entered becomes permanent, and cannot be
changed.
Locate and install the DVD-ROM Applications
CD.