Running The Computer On Its Battery; Recharging The Battery - Fujitsu LifeBook C Series Owner's Manual

RUNNING THE COMPUTER
ON ITS BATTERY

Recharging the battery

1. Connect the AC adapter to your computer.
When you connect the AC adapter to your
computer, the AC adapter automatically
starts to charge the internal battery pack, and
the charging status indicator (
battery life remaining at that time are
displayed on the operating status indicator
LCD.
2. After the charging status indicator has
gone off, disconnect the AC adapter from
your computer.
10
Recharge the supplied battery pack
prior to first using it after purchase or if
it is not recharged for more than one
month.
Once the battery has been fully charged,
the charging status indicator goes off
and the battery life indicator at the left
end stops blinking (
on (
) and the
battery to be fully charged.
When the battery is 90% or more
charged, it cannot be recharged even if
the AC adapter is connected. The
battery can be recharged when its
remaining life is 89% or less.
The chargeability of the batter y
degrades when it is used in an extremely
hot or cold place.
When the batter y is very hot, for
example, immediately after the use of
the computer, the battery protection
function may be activated to prevent the
battery from being recharged. (The
charging status indicator blinks.) In such
a case, stop charging the battery and
wait for a while until the batter y
temperature comes down.
) and goes
). Allow sufficient time for the